Railroad Crossing for Lionel O Fastrack 3-rail 36"curve.
Laser Cut/Engraved Wood Plank Railroad Grade Crossing. Curved 36". Cut planks, engraved nail/bolt detail. Specfically designed for LIONEL(R) Fastrack. However, should fit any "O" Gauge 3 rail track 36" radius curved section with 1/8 inch rail height. E-Mail with questions, happy to help.
6" long or 24 scale ft. Wide enough for two trafic lanes. Shims included to raise center to track bolt level and position top board below center third rail so not to obstruct power contact pickup. Allows for proper wheel flange clearance. Laser cut to proper fit on all rails. Easy installation, ready to weather to your satisfaction. Real Railroad Prototypical Appearance. Stain or color to your choice or leave natural when installed. See photos. Stain should be blended better, but this shows the beginning of one lane of traffic pattern. Covers ties and provides an edge to stop scenery, road surface without fouling track. Installs easily with any type of glue, following instruction on header card. You must add ramps or scenic road way to each side of the crossing or use our ramps, available seperatly. Material provided makes one (1) grade crossing (single track). We make straight crossings and O-42", O-48" & O-72" radius crossings for the LIONEL(R) Fastrack system also. Custom work can be done for special installations.
Multiple purchases are fine, mix or match style/radius OK, shipping will caculate accordingly. Thanks for your order. Check my other items & auctions for bulk packages and other radius or straight crossings, order extras and save on freight cost.
Thanks for your interest.
Payment & Shipping Information:
I do combine items to save you on shipping charges. When you fill out my automatic checkout, your reduced charges will automatically be computed.
Shipping for international orders will also be determined after the close of the auction and will be First Class mail unless requested otherwise.
We prefer PayPal Payments.
Thank you for your interest & please refer us to your facebook friends after you purchase from us.
Posted by Tom Frasca on 27th Apr 2015
I had been looking for a curved fastrack railroad crossing for some time and finally found a product that I could use to finish the first section of my layout. These work and look great. They were well made and easy to install. I had to sand down the shims so the crossing was level with the rails and then they fit perfect. I would recommend this product without hesitation and I plan to use them on the next section of my layout. Also, dealing with John has been a pleasure and I look forward to doing business with him again.
All prices are in USD.