Crossing & Ramp Set - S Scale Straight Roadway SET: American Flyer/Lionel/MRGS :

2-Rail 27 Radius Fastrack System  

Model Railroad Straight Crossings & Track Set

Includes 1 Set Straight Railroad Crossings: 27 R Kit#8001

&

1 Set of Straight Railroad Ramps: 27 R  Kit# 8001Ramp

Railroad Crossing (MRGS8100) for Lionel (American Flyer) S scale (1:64) 2-rail Straight FastTrack, sectional track, and (ramps(MRGS-8100R)  together in one set

 Laser Cut/Engraved Wood Plank Railroad Grade Crossing kit (MRGS-8100) this is the crossing ( between the rails (3 boards) 

&

one(1) board each side outside the rails), and ramps (MRGS-8100R) see other ads and additional photos.  

NOTE: new pictures to show redesigned nail pattern now accurate lines up with tie placement.  Straight cut planks, engraved nail/bolt detail. Specifically designed for LIONEL(R) S American Flyer Fastrack (will fit S-Track from S-Helper service). However, should fit any similar "S" Gauge (1:64 or 3/16 scale) 2 rail track (sectional, flex or hand laid) straight section with 0.087" to 0.148" rail height. 5" long or 26+ scale ft. Wide enough for two traffic lanes. Shims included to raise center to track bolt level and position top boards below rails.  NOTE: Wording on shim in the photo is for information in this listing, listed product as shipped will only have arrow and NO wording. Additional photos show sample installations.    

Instruction ideas for Real Railroad Prototypical Appearance

This set allows for proper wheel flange clearance. Laser cut to proper fit on all rails.

Easy installation, ready to weather to your satisfaction. .

Stain or color to your choice or leave natural when installed. See photos of installations. 

Covers ties and provides an edge to stop scenery, road surface without fouling track.

Installs easily with any type of glue, following instruction on header card.  

These crossings may be used in any S Scale application, the crossing is laser cut to clear wheel flanges and may be use with any rail from .090 to .148+ in height.

Shim provided (0.040) will provide a total crossing height of 0.130+ and clear any rolling stock operated on 0.148 rail. Use the crossing itself with any thickness shim for other rail height from 0.090 up.

Material provided makes one (1) grade crossing (single track) with 2 roadway (auto) lanes.

We make other S scale crossings and O Scale crossings for the LIONEL (R) Fastrak system and ramps for all.

Custom work can be done for special installations. 

Multiple purchases are fine, mix or match style/radius OK, shipping will calculate accordingly.

Thanks for your order.