S Scale 20R -RR Crossing for Lionel(American Flyer 2-rail Curved Fastrack system

2 Rail Curved Railroad Crossing 20R (MRGS  Kit #8020 ) for Lionel/American Flyer  S scale

(1:64) 2-rail Curved Fastrack, sectional track 

Laser Cut/Engraved Wood Plank Railroad Grade Crossing kit (MRGS-8020) this is the crossing only,

Our ramps are a separate kit (MRGS-8020Ramp) now available

Curved. Cut planks, engraved nail/bolt detail. Specifically designed for LIONEL(R) S American Flyer Fastrack.

However, should fit any similar "S" Gauge (1:64 or 3/16 scale) 2 rail track curved 20"radius section with 0.148" rail height. 4.6" long or 25.5 scale ft.

Wide enough for two traffic lanes.

Shims included to raise center to track bolt level and position top boards below rails so not to obstruct power pickup (wheel contact).

To install on flex track carefully curve track to fit crossing and adjust to insure flange space is proper.

Allows for proper wheel flange clearance. Laser cut to proper fit on all rails.

Easy installation, length adjusted to fit with tie spacing, nail detail will line up with ties when crossing end is placed with end aligned with edge of tie.

Ready to weather to your satisfaction.

Real Railroad Prototypical Appearance.

You can stain or color to your choice or leave natural when installed.   

Covers ties and provides an edge to stop scenery, road surface without fouling track.

Installs easily with any type of glue, following instruction on header card.

You must add ramps or other scenic road way to each side of the crossing. 

These crossings may be used in any S Scale Standard Gauge (Narrow Gauge to follow) application, the crossing is laser cut to clear wheel flanges and may be use with any rail from .090 to .148+ in height. Shim provided (0.040) will provide a total crossing height of 0.130+ and clear any rolling stock operated on 0.148 rail. Use the crossing itself with any thickness shim for other rail height from 0.090 up. For scale code 100 rail, just don't use the shims. Bottom edges of crossing may need to be sanded back to clear spikes and tie plates.

Material provided makes one (1) grade crossing (single track) with 2 roadway (auto) lanes. We make other S scale crossings and O Scale crossings for the LIONEL (R) Fastrack system and ramps for all. Custom work can be done for special installations. 

All our crossings including shims are manufactured of premium, first quality, Basswood,  Poplar or Birch plywood or sheet wood stock. These parts are precision cut on a Laser to match the tie spacing and track gauge specified.  If you do not understand some part of our instructions or have questions on installation, appearance, installation or final finishing (staining or painting) please contact us for assistance.