S Scale Straight Railroad Crossing - American Flyer/Lionel/MRGS

 S Scale Straight Grade Crossing for Lionel(American Flyer) 2-rail Fastrak system

Railroad Crossing (MRGS8001) for Lionel (American Flyer) S scale (1:64) 2-rail Straight Fastrak,

Sectional track (ramps(MRGS-8001R) available separately, see other listing or buy them together for combined shipping.

Laser Cut/Engraved Wood Plank Railroad Grade Crossing kit (MRGS-8001) this is the crossing only.

Ramps are a separate kit (MRGS-8001R) now available, see other items and additional photos.

Straight. Cut planks, engraved nail/bolt detail.

Specifically designed for LIONEL(R) S American Flyer Fastrak.

However, should fit any similar "S" Gauge (1:64 or 3/16 scale) 2 rail track straight section with 0.148" rail height. 5" long or 26+ scale ft.

Wide enough for two traffic lanes.

Shims included to raise center to track bolt level and position top boards below rails so not to obstruct power pickup (wheel contact).

  NOTE: Wording on shim in the photo is for information in this listing, listed product as shipped will only have arrow and NO wording.  

Allows for proper wheel flange clearance. Laser cut to proper fit on all rails.

Easy installation

Ready to weather to your satisfaction.

Real Railroad Prototypical Appearance.

Stain or color to your choice or leave natural when installed.

Covers ties and provides an edge to stop scenery, road surface without fouling track.

Installs easily with any type of glue, following instruction on header card.

For an Awesome layout, you must add ramps (see our NEW product listing for these) or other scenic road way to each side of the crossing. 

These crossings may be used in any S Scale application, the crossing is laser cut to clear wheel flanges and may be use with any rail from .090 to .148+ in height. Shim provided (0.040) will provide a total crossing height of 0.130+ and clear any rolling stock operated on 0.148 rail. Use the crossing itself with any thickness shim for other rail height from 0.090 up.

Material provided makes one (1) grade crossing (single track) with 2 roadway (auto) lanes. We make other S scale crossings and O Scale crossings for the LIONEL (R) Fastrak system and ramps for all. Custom work can be done for special installations. 

Thank you for for your order